EXTRAORDINARY BROCKVILLE MOLD REMOVAL |
|
CALL OUR TEAM OF EXPERTS:
|
343-307-0135 |
MOLD TESTING AND SAMPLING
Sampling for mold should be conducted by professionals who have specific experience in designing mold sampling protocols, sampling methods and interpreting results.
TEST SUSPECTED MOLD AT YOUR HOME AND OFFICE TODAY !
TEST SUSPECTED MOLD AT YOUR HOME AND OFFICE TODAY !
|
MOLD TESTING AND INSPECTION Are you concerned about Mold in your home? Find out if mold is growing in your home with air samples, surface samples or a full Mold Inspection. All of the samples are sent to a laboratory for analysis and you will receive a report with the types of mold found and descriptions of the molds. Don’t let mold destroy your home or compromise you health, Brockville mold removal is available to give you the best experience 
Surface Samples (with lab report)Different types of mold can vary in color and look. If you aren’t sure what you see is mold, a surface sample can identify what type of mold it is.
|
Air Samples (with lab report)Typically when it comes to air samples. Three samples are taken, two from the outside and one from the area of concern, inside the building or the most commonly used area.
Mold spores are everywhere in nature and comparing the inside and outside samples gives us a baseline. If mold spores are found inside the home that aren’t found outside or they are in much higher numbers. There may be mold growing in the home. 
Full Mold Inspection (with lab report)
A Full Mold Inspection will scan the whole house for any signs of moisture and mold growth. The whole house can be inspected or just a specific area that you are concerned with. A thermal (infrared) camera and moisture meter will be used and any signs of moisture will be noted in the Mold Inspection Report. |
Things You Should Know about Mold
1) Potential health effects and symptoms associated with mold exposures include allergic reactions, asthma and other respiratory complaints.
2) There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture.
If mold is a problem in your home or school, you must clean up the mold and eliminate sources of moisture.
3) Fix the source of the water problem or leak to prevent mold growth.
Reduce indoor humidity (to 30-60%) to decrease mold growth by:
Venting bathrooms, dryers and other moisture-generating sources to the outside
Using air conditioners and dehumidifiers
Increasing ventilation
Using exhaust fans whenever cooking, dish washing and cleaning
Clean and dry any damp or wet building materials and furnishings within 24-48 hours to prevent mold growth.
4) Clean mold off hard surfaces with water and detergent, and dry completely. Absorbent materials such as ceiling tiles, that are moldy, may need to be replaced.
Prevent condensation: Reduce the potential for condensation on cold surfaces (i.e., windows, piping, exterior walls, roof, or floors) by adding insulation.
In areas where there is a perpetual moisture problem, do not install carpeting (i.e., by drinking fountains, by classroom sinks, or on concrete floors with leaks or frequent condensation).
Molds can be found almost anywhere; they can grow on virtually any substance, providing moisture is present. There are molds that can grow on wood, paper, carpet, and foods.
2) There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture.
If mold is a problem in your home or school, you must clean up the mold and eliminate sources of moisture.
3) Fix the source of the water problem or leak to prevent mold growth.
Reduce indoor humidity (to 30-60%) to decrease mold growth by:
Venting bathrooms, dryers and other moisture-generating sources to the outside
Using air conditioners and dehumidifiers
Increasing ventilation
Using exhaust fans whenever cooking, dish washing and cleaning
Clean and dry any damp or wet building materials and furnishings within 24-48 hours to prevent mold growth.
4) Clean mold off hard surfaces with water and detergent, and dry completely. Absorbent materials such as ceiling tiles, that are moldy, may need to be replaced.
Prevent condensation: Reduce the potential for condensation on cold surfaces (i.e., windows, piping, exterior walls, roof, or floors) by adding insulation.
In areas where there is a perpetual moisture problem, do not install carpeting (i.e., by drinking fountains, by classroom sinks, or on concrete floors with leaks or frequent condensation).
Molds can be found almost anywhere; they can grow on virtually any substance, providing moisture is present. There are molds that can grow on wood, paper, carpet, and foods.
CALL FOR A FREE QUOTE. GET FAST AND RELIABLE SERVICE RIGHT AWAY. (343) 307-0135